Hobbywing XERUN V10 8.5T Brushless Motor
The exterior design of V10 G2 is inspired by the wheel design of super sports car.
The gap between the motor rotor and motor housing is extremely small due to precision machining and
no copper sheet is needed avoids the motor failure caused by
the wear of the copper sheet.
Linear & Smooth Control
The built-in Hall sensor adjustable end bell combined with a
high precision and balanced rotor guarantees the user a smooth
and linear power on demand.
The motor housing is made from hard anodized aluminum,
motor windings are wound from double insulated wire,
the advanced rotor structure is designed to handle high temperature from the use of rare
earth magnets and the imported bearings which are implemented are high precision
metal caged for a minimum to zero friction which in turn will guarantee strength,
outstanding performance, high durability and smoothness of the motor.
Adjustable mechanical timing, ranges from 20 degrees to 50 degrees and
30 degrees to 60 degrees for (3.5T-8.5T) non-Stock motors and (10.5T-25.5T) Stock
motors, for different applications.
The output performance of this motor has an efficiency of up to 90%.
In the same load condition, V10 G2 motor has the higher efficiency but
lower temperature than V10 motor.
Re-buildable Case Design
The motor case is designed to be easy to dismantle for maintenance purposes
and for the replacement of common wearing parts (Ex bearings).
IFMAR, ROAR, JMRCA Certified
This motor is in compliance with IFMAR, ROAR,
JMRCA specifications and approved by ROHS, CE, FCC, and etc.
|Product Name||Xerun V10 G2 8.5T|
|Brushless / Brushed||BL|
|Sensored / Sensorless||SD|
|Relevant Parameters||KV Rating||4050|
|No-Load Current A||3.2|
|Max. Power Output W||360|
|Amp at the Max. Power Output A||90|
|Size & Weight||O.D. mm||36.0|
|Shaft Diameter mm||3.175|
|Other Parameters||Timing||20-50 Degrees Adjustable|
1/10th, Drift Car, 2WD Offroad